Changing the remote control battery

Make sure that you dispose of


Make sure that you dispose of old batteries in an
environmentally friendly way.

Seek advice from your local authority regarding recycling.

If the range of the transmitter in the key decreases gradually, the battery (type 3V CR 2032) should be replaced.

Х Carefully separate the transmitter unit


Х Carefully separate the transmitter unit from the key using a flat object (e.g. a screwdriver) at the recess on the back.

Х Carefully prise out the battery with the flat object. Fit the new battery between the contacts with the + sign facing downwards. Reassemble the transmitter unit in reverse order.

Х Open the transmitter unit by


Х Open the transmitter unit by separating the retaining clips on the sides with the flat object.

Х Carefully prise out the battery with the


Х Carefully prise out the battery with the flat object. Fit the new battery between the contacts with the + sign facing downwards. Reassemble the transmitter unit in reverse order.

    See also:

    Rocker gear - dismantling and reassembly
    Dismantling 1 With the rocker assembly removed as described in Section 4, extract the split pin from one end of the rocker shaft (see illustration). 6.1 Rocker shaft assembly components 2 Take ...

    Engine valve clearance check (Every 12 000 miles (20 000 km) or 12 months)
    SOHC engines 1 The valve clearances must be checked with the engine cold. On carburettor models remove the air cleaner. 2 Disconnect the HT leads from the spark plugs and release them from the cl ...

    Rear shock absorbers (Van models) - removal, testing and refitting
    Removal 1 Raise and support the rear of the vehicle on stands (see УJacking and Vehicle SupportФ). Place a jack beneath the rear axle tube and just raise it slightly. 2 Disconnect the shock absor ...