Hazard warning flashers
Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake heavily.
For item location: See Quick start.
See also:
Manifold Absolute Pressure (MAP) sensor - removal and refitting
Removal
1 Disconnect the battery negative lead.
2 Disconnect the sensor wiring plug (see
illustration). Do not pull on the wiring.
16.2 Manifold absolute pressure (MAP) sensor - 1.4 CFI engine
...
Crankshaft front oil seal - renewal
Note: A suitable puller will be required to
remove the crankshaft pulley. A new
crankshaft pulley bolt, and a new lower timing
chain cover gasket, must be used on refitting.
1 The crankshaft front ...
Fuel tank - removal and refitting
Refer to Chapter 4 Part A, Section 9. ...