Electric windows

WARNING:
Do not operate the electric windows unless they are free from obstruction.

Note: If you operate the switches often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating.

Switch on the ignition to operate the


Switch on the ignition to operate the electric windows.

To open the driver’s window automatically

Press the switch to the second action point and release it. Press it again to stop the window.

    See also:

    Seat belts - removal and refitting
    Front belt - 3-door models Note: Note the fitted sequence of any plates, washers and spacers when unbolting the seat belt anchors. Removal 1 Slide the belt stalk cover upwards to expose the anch ...

    Seats - removal and refitting
    Front seat Removal 1 Slide the seat as far forward as it will go. 2 Unscrew and remove the bolts which retain the rear of the seat slides to the floor pan. 3 Slide the seat as far to the rear as ...

    Oil pump - dismantling, inspection and reassembly
    1.8 litre (R2A type) 1 If oil pump wear is suspected, check the cost and availability of new parts and the cost of a new pump. Examine the pump as described in this Section and then decide whethe ...