See also:

Fluid reservoir (ABS) - removal and refitting
Note: New seals must be used between the reservoir and the hydraulic unit on reassembly. Caution: Refer to the precautions in Section 1. Removal 1 Disconnect the battery negative lead. 2 Depress ...

Fuel tank - removal and refitting
Caution: Refer to the precautions in Section 1 before proceeding. 1 Run the fuel level as low as possible before removing the tank. 2 Disconnect the battery negative lead. 3 Remove the tank fill ...

Bonnet lock - removal and refitting
Models up to 1987 1 Working in the engine compartment, disconnect the cable from the bonnet lock by pulling the cable sheath end fitting from its bracket, then releasing the end fitting from the ...