Tailgate/boot lid spoiler - removal and refitting

Models up to 1990
1 Open the tailgate/boot lid.

2 Prise the four screw covers from the spoiler, then remove the screws, and withdraw the spoiler.

3 Refitting is a reversal of removal.

Models from 1990
4 Open the tailgate/boot lid.

5 Remove the inner tailgate/boot lid trim panel for access to the spoiler securing nuts.

6 Unscrew the central spoiler securing nut, then unscrew the four outer securing nuts (two on each side), and withdraw the spoiler.

7 Refitting is a reversal of removal.

    See also:

    Vehicle identification number (VIN)
    The vehicle identification number is stamped into the floor panel on the right-hand side, beside the front seat. It is also shown on the left-hand side of the instrument panel. ...

    Hints on driving with ABS
    When the ABS is operating, the brake pedal will pulse. This is normal. Maintain pressure on the brake pedal. The ABS will not eliminate the dangers inherent when: • you drive too close to the veh ...

    Fuel filler flap
    WARNINGS: Take care when refuelling to avoid spilling any residual fuel from the fuel nozzle. Do not use any kind of flames or heat near the fuel system. The fuel system is under pressure. There ...