Door check arm - removal and refitting

Removal
1 Remove the door inner trim panel.

2 Unscrew and remove the bolt securing the check arm to the body pillar.

3 Unscrew and remove the two bolts securing the check arm to the door, and withdraw the check arm from inside the door.

Peel back the waterproof plastic sheet where necessary for improved access.

Refitting
4 Refitting is a reversal of removal.

    See also:

    Idle Speed Control Valve (ISCV) - removal, cleaning and refitting
    Removal 1 Disconnect the battery negative lead. 2 Disconnect the valve wiring plug (see illustration). 12.2 Idle speed control valve - 1.6 EFI engine A Wiring plug B Securing bolts 3 Unscrew t ...

    Ignition HT coil - testing, removal and refitting
    Note: Refer to the precautions given in Section 1 before proceeding. All except models with DIS ignition system Testing 1 Accurate checking of the coil output requires the use of special test eq ...

    Connecting an external device
    WARNING: Make sure the external device is securely mounted within the vehicle, and that trailing connections do not obstruct any of the driving controls. External devices may be connected using ...