Opening rear quarter window - removal and refitting

Removal
1 Remove the rear pillar interior trim panel.

2 Remove the two screws securing the window catch to the body (see illustration).

26.2 Opening the rear quarter window catch
26.2 Opening the rear quarter window catch

A Cap
B Retainer
C Grommet
D Spacer
E Catch
F Screw (one of two)

3 Prise the two screw covers from the hinges.

Support the glass, and remove the two hinge screws, then lift out the glass (see illustration).

26.3 Opening the rear quarter window hinge
26.3 Opening the rear quarter window hinge

A Cap
B Screw
C Hinge
D Spacer
E Grommet
F Retainer
G Cap
H Screw

4 If a new window is to be fitted, transfer the catch to it.

Refitting
5 Refitting is a reversal of removal.

    See also:

    Heater motor - removal and refitting
    Removal 1 Disconnect the battery negative lead. 2 Where necessary, unclip the brake servo vacuum hose for improved access. 3 On models from 1987, unclip the windscreen washer hoses and wiring fro ...

    Automatic climate control
    Automatic climate control The system controls the temperature, amount and distribution of the air flow automatically and adjusts them according to the driving and weather conditions. Pressing t ...

    Four Wheel Drive (4WD) System (if equipped)
    WARNING: For important information regarding safe operation of this type of vehicle, see Preparing to drive your vehicle in this chapter. Your vehicle is equipped with an intelligent 4WD System th ...