Overhead console - removal and refitting

1 Disconnect the battery negative lead.

2 Open the sunroof.

3 On models with a manually-operated sunroof, remove the sunroof handle securing screw, then withdraw the handle and trim plate.

4 On models with an electric sunroof, remove the operating switch.

5 Remove the courtesy lamp, if necessary, then remove the two screws from the front of the console (see illustration).

45.5 Overhead console securing screws (A)
45.5 Overhead console securing screws (A)

6 Remove the two screws securing the rear of the console to the sunroof flange, and withdraw the console.

7 Refitting is a reversal of removal.

    See also:

    Vehicle identification number (VIN)
    Vehicle identification number (VIN) The vehicle identification number is stamped into the floor panel on the right-hand side, beside the front seat. It is also shown on the left-hand side of the ...

    Modulator drivebelt (antilock braking system) - removal and refitting
    Note: Whenever an ABS modulator adjuster bolt is slackened or removed, the bolt threads should be lightly coated with grease to prevent the possibility of bolt seizure. Take care not to contaminat ...

    Fastening the seat belts
    WARNING: Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click. Pull the belt out steadily. It may lock if ...