Direction indicator and hazard warning flasher switch assembly - renewal

1 Disconnect the battery negative lead.

2 Remove the securing screws and unclip the lower and upper steering column shrouds.

3 Remove the two securing screws and disconnect the two wiring plugs, then withdraw the switch from the steering column.

4 Refitting is a reversal of removal.

    See also:

    Bulb specification chart
    ...

    Using voice control
    System operation The order and content of the voice controls are given in the following lists. The tables show the sequence of user voice commands and system responses for each available function ...

    Vacuum servo unit and linkage - removal and refitting
    Removal 1 Refer to Section 12 and remove the master cylinder. 2 On fuel-injection models unclip and lift out the front section of the heater plenum chamber to provide access to the connecting li ...