Electric door mirror switch - removal and refitting

1 Disconnect the battery negative lead.

Models up to 1987
2 Using a thin-bladed screwdriver, carefully prise the switch from the door trim panel.

3 Disconnect the wiring plug and withdraw the switch (see illustration).

10.3 Disconnect the wiring plug from the door mirror switch - models up to
10.3 Disconnect the wiring plug from the door mirror switch - models up to 1987

4 Refitting is a reversal of removal.

Models from 1987
5 Prise the securing screw cover from the mirror control panel, then remove the screw and withdraw the control panel.

6 Depress the switch retaining tang, then withdraw the switch from the control panel and disconnect the wiring plug.

7 Refitting is a reversal of removal.

    See also:

    Using winter tyres
    CAUTION: Make sure that you use the correct wheel nuts for the type of wheel the winter tyres are fitted to. If winter tyres are used, make sure that the tyre pressures are correct. See Technica ...

    Telephone setup
    Requirements for cradle connection Your phone must be fitted in a mobile phone holder before it can be used as a cradle phone with your handsfree/voice control system. You will be able to purcha ...

    Principle of operation
    Disc brakes Wet brake discs result in reduced braking efficiency. Dab the brake pedal when driving from a car wash to remove the film of water. ABS WARNING: The ABS does not relieve you of you ...