Electric sunroof components - removal and refitting

Switch
1 Disconnect the battery negative lead.

2 Using a thin-bladed screwdriver, carefully prise the switch from the overhead console.

3 Disconnect the wiring plug and remove the switch.

4 Refitting is a reversal of removal.

Relay
5 Remove the overhead console.

6 Unclip the relay from the motor assembly and disconnect the wiring plug (see illustration).

17.6 Electric sunroof relay (A) and motor securing bolts (B)
17.6 Electric sunroof relay (A) and motor securing bolts (B)

7 Refitting is a reversal of removal.

Motor
8 Remove the overhead console.

9 Disconnect the motor wiring plug.

10 Unscrew the three securing bolts, and withdraw the motor assembly from the roof.

11 Refitting is a reversal of removal, but ensure that the drive gear is aligned with the roof operating mechanism.

    See also:

    Daytime running lamps (DRL) (if equipped)
    Turns the low beam headlamps on with a reduced output. To activate: Х the ignition must be in the on position. Х the headlamp control must be in the off, parking lamps or autolamp position. Х ...

    Air cleaner element renewal (Every 24 000 miles (40 000 km) or 2 years)
    Carburettor models 1 Remove the screws from the top of the air cleaner cover (see illustration). 38.1 Remove the air cleaner cover screws . . . 2 Where applicable release the spring clips aroun ...

    Vehicle loading Ц with and without a trailer
    This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading ...