Cigarette lighter - renewal

1 Disconnect the battery negative lead.

2 Working behind the facia panel, disconnect the wiring, then push out the lighter assembly through the front of the facia panel.

3 If required, the illumination ring assembly can now be withdrawn after removing the bulbholder.

4 Refitting is a reversal of removal.

    See also:

    Horn switch assembly - removal and refitting
    1 Disconnect the battery negative lead. Switch Models up to 1987 2 Pull the trim insert from the centre of the steering wheel, and disconnect the lead from the horn push. 3 Disconnect the two le ...

    Refuelling
    CAUTION: Do not attempt to start the engine if you have filled the fuel tank with the incorrect fuel. This could damage the engine. Have the system checked by a properly trained technician immedi ...

    Bonnet release cable - removal and refitting
    Removal 1 Working inside the vehicle, extract the three screws and remove the steering column shroud. Open the bonnet. If the cable is broken, the release latch must be operated using a suitably ...