Ford Fusion 2010 review

See also:

Vacuum servo (conventional braking system) - removal and refitting
Caution: Refer to the precautions in Section 1. Removal 1 To remove the servo, first remove the master cylinder. 2 Disconnect the vacuum hose from the servo (see illustration). 14.2 Servo vac ...

Manual transmission operation (if equipped)
Using the clutch Manual transmission vehicles have a starter interlock that prevents cranking the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the parkin ...

General information
General points on starting If the battery has been disconnected the vehicle may exhibit some unusual driving characteristics for approx. 8 kilometres (5 miles) after reconnecting the battery. Thi ...