Map reading lamp - removal and refitting

1 Disconnect the battery negative lead.

2 Remove the courtesy lamp and disconnect the map reading lamp wires.

3 Push the map reading lamp out of its location by inserting a finger through the courtesy lamp aperture.

4 Refitting is a reversal of removal.

    See also:

    Valve block (ABS) - removal and refitting
    Caution: Refer to the precautions in Section 1. Removal 1 Disconnect the battery negative lead. 2 Depressurise the hydraulic system by pumping the brake pedal at least 20 times, or until it beco ...

    Repairing minor paint damage
    CAUTION: Remove apparently harmless looking substances from the paintwork immediately (e.g. bird droppings, tree resins, insect remains, tar spots, road salt and industrial fall out). You should ...

    Handbrake cable - adjustment
    Note: Where fitted, the adjuster locking pin must be renewed on completion of adjustment. Conventional braking system (except P100 models) 1 The handbrake cable is normally self-adjusting in use ...