Wiper arms - removal and refitting

Windscreen and rear wipers 1 Lift the hinged covers and remove the nuts and washers securing the arms to the spindles.

2 Mark the arms and spindles in relation to each other then prise off the arms using a screwdriver.

Take care not to damage the paintwork.

3 Refitting is a reversal of removal.

Headlamp wipers
4 The procedure is as described in paragraphs 1 to 3, but the washer hose must be disconnected from the nozzle on the wiper arm (see illustration).

32.4 Removing a headlamp wiper arm
32.4 Removing a headlamp wiper arm

    See also:

    Dodge car's owners
    Dodge sells just one model in the UK, the Journey MPV, which is a rival for the Peugeot 5008 and Renault Scenic. Dodge is part of Chrysler, which is now owned by Fiat, so while the range is small now, ...

    Facia panels - removal and refitting
    Models up to 1992 1 Note the locations of the facia panel securing screws (see illustration). 43.1 Facia panel securing screw locations (arrowed) A Upper facia panel B Passenger side lower faci ...

    Driving through water
    Driving through water CAUTIONS: Drive through water in an emergency only, and not as part of normal driving. Engine damage can occur if water enters the air filter. In an emergency, the vehicle ...