Electric window components - removal and refitting

1 Disconnect the battery negative lead.

Switches
2 Prise the switch from its location using a thin-bladed screwdriver, and disconnect the wiring plug (see illustration).

49.2 Disconnecting the wiring plug from a centre console-mounted electric
49.2 Disconnecting the wiring plug from a centre console-mounted electric window switch - models from 1987

3 Refitting is a reversal of removal.

Operating motors
4 Remove the window regulator.

5 Remove the three securing bolts, and withdraw the motor from the regulator assembly (see illustration).

49.5 Electric window motor securing bolts (arrowed)
49.5 Electric window motor securing bolts (arrowed)

6 Refitting is a reversal of removal, but ensure that the drive gear is correctly meshed with the regulator.

    See also:

    Steering
    Your vehicle is equipped with an electric power-assisted steering (EPAS) system. There is no fluid reservoir to check or fill. If your vehicle loses electrical power while you are driving (or if t ...

    Cigar lighter - removal and refitting
    Removal 1 Disconnect the battery negative terminal. 2 On pre-1986 models remove the ashtray then undo the screws and withdraw the ashtray housing. On 1986 models onwards, refer to Section 21 and ...

    Cargo nets
    Cargo retention net To install the cargo retention net cassette: Remove the luggage cover. Push the sliders on the cassette towards each other and insert the telescopic bar into the holes on the ...