Manual seats

Moving the seats backwards and forwards
Moving the seats backwards and forwards

WARNING:
Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch.

Adjusting the height of the driver’s seat
Adjusting the height of the driver’s seat

Adjusting the angle of the seatback
Adjusting the angle of the seatback

Folding the passenger seat forwards

WARNINGS:
Do not drive with the passenger seat folded forwards if the rear seat directly behind it is occupied.

Do not drive with items on the folded seatback.

1. Fold the seat forwards.


1. Fold the seat forwards.

2. Turn the wheel until the seatback is


2. Turn the wheel until the seatback is horizontal.

Pull the locking lever to return the seatback to the vertical position. Make sure that the seatback is securely latched in position.

    See also:

    Changing tires with a TPMS
    Each road tire is equipped with a tire pressure sensor located inside the tire/wheel cavity. The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is ...

    Tire pressure monitoring system (TPMS)
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inf ...

    Principle of operation
    WARNING: The parking aid does not relieve you of your responsibility to drive with due care and attention. CAUTIONS: Vehicles fitted with a trailer tow module not approved by us may not correct ...