Battery terminal check (Every 12 000 miles (20 000 km) or 12 months)

Caution: Before carrying out any work on the vehicle battery, read through the precautions given in Safety first! at the beginning of this manual.

1 The battery fitted as original equipment is maintenance-free, and requires no maintenance apart from having the case kept clean, and the terminals clean and tight.

2 To clean the battery terminals disconnect them, after having first removed the cover (later models) - negative earth first. Use a wire brush or abrasive paper to clean the terminals. Bad corrosion should be treated with a solution of bicarbonate of soda, applied with an old toothbrush. Do not let this solution get inside the battery.

3 Coat the battery terminals with petroleum jelly or a proprietary anti-corrosive compound before reconnecting them. Reconnect and tighten the positive (live) lead first, followed by the negative (earth) lead. Do not overtighten.

4 Keep the top of the battery clean and dry.

Inspect the battery tray for corrosion, and make good as necessary.

    See also:

    Automatic transmission selector linkage lubrication (Every 12 000 miles (20 000 km) or 12 months)
    Lubricate the transmission selector and kickdown linkages with engine oil or aerosol lubricant. ...

    Steering tie-rod outer balljoint - renewal
    1 If as the result of inspection the tie-rod outer balljoints are found to be worn, remove them as described in Section 20. 2 When the balljoint nuts are unscrewed, it is sometimes found that the ...

    General information on radio frequencies
    CAUTION: The radio frequency used by your remote control can also be used by other short distance radio transmissions (e.g. amateur radios, medical equipment, wireless headphones, remote control ...