Automatic transmission selector linkage lubrication (Every 12 000 miles (20 000 km) or 12 months)

Lubricate the transmission selector and kickdown linkages with engine oil or aerosol lubricant.

    See also:

    Crankshaft rear oil seal - renewal
    1 Remove the flywheel/driveplate. 2 Prise out the oil seal. If necessary, drill the outer face of the oil seal and use self-tapping screws and a pair of grips to withdraw the seal (see illustratio ...

    Carburettor (Weber 2V TLD) - removal and refitting
    Caution: Refer to the precautions in Section 1 before proceeding. Note: A new gasket must be used when refitting the carburettor. A tachometer and an exhaust gas analyser will be required to chec ...

    Handbrake cable - removal and refitting
    Removal 1 Chock the front wheels, loosen the rear roadwheel nuts, then jack up the rear of the vehicle and support on axle stands. Release the handbrake and remove the roadwheels. 2 Slacken the h ...