Crankshaft rear oil seal - renewal

1 Remove the flywheel/driveplate and the engine adapter plate.

2 Extract the oil seal using an oil seal removal tool if available. It may also be possible to remove the oil seal by drilling the outer face and using self-tapping screws and a pair of grips (see illustration).

28.2 Crankshaft rear oil seal location (arrowed)
28.2 Crankshaft rear oil seal location (arrowed)

3 Clean the oil seal housing, then drive in a new seal using a suitable metal tube or socket. Make sure that the seal lip faces into the engine and lightly smear the lip with clean engine oil.

4 Refit the engine adapter plate and the flywheel/driveplate.

    See also:

    Easy Fuel Уno capФ fuel system
    Your fuel tank is equipped with an Easy Fuel Уno capФ fuel filler system. This allows you to simply open the fuel filler door and insert the fuel filler nozzle into the fuel system. The Easy Fuel ...

    Internal connection details. P100 models from 1988 onwards
    Internal connection details. P100 models from 1988 onwards ...

    Buying a Ford Sierra
    Unsurprisingly, little. Be wary of very-high mileage cars for obvious reasons, though, with service records, you should be safe. Turbo cars can be a little fragile and temperamental, like most of ...