Engine mountings - renewal

Proceed as described in Chapter 2, Part C, but note that on certain models it may be necessary to unbolt the engine mounting brackets from the cylinder block to allow sufficient clearance to remove the mountings.

    See also:

    Engine oil cooler - removal and refitting
    Note: Suitable sealant will be required on refitting - see text. Removal 1 Remove the engine oil filter (Chapter 1). 2 Note the angle at which the coolant hoses are set, then disconnect the hoses ...

    Fuel quality - Petrol
    CAUTION: Do not use leaded petrol or petrol with additives containing other metallic compounds (e.g. manganese-based). They could damage the emission system. Note: We recommend that you use only ...

    Coolant renewal (Every 24 000 miles or 2 Years)
    Cooling system draining 1 It is preferable to drain the system when the coolant is cold. If it must be drained when hot, release the pressure cap on the thermostat housing (or expansion tank on la ...