Crankshaft and bearings - examination and renovation

1 Proceed as described in Chapter 2, Part A, noting the following.

2 Production bearing undersizes are indicated as follows:
Yellow or red paint marks on crankshaft - standard-diameter main bearing journals.

Green line on crankshaft front counterweight - main bearing journals 0.25 mm undersize.

Green spot on counterweight - big-end bearing journals 25 mm undersize.

    See also:

    Audio unit commands
    CD Player You can control playback directly by voice control. Overview The overview below shows the available voice commands. The following lists will give further information about the complet ...

    Diagram 2a. Exterior lighting - signal warning lamps. Models from 1987 to May 1989
    Diagram 2a. Exterior lighting - signal warning lamps. Models from 1987 to May 1989 ...

    Exhaust system check (Every 12 000 miles or 12 months)
    With the vehicle raised on a hoist or supported on axle stands (see “Jacking and Vehicle Support”), check the exhaust system for signs of leaks, corrosion or damage and check the rubber mountings ...