Refuelling
CAUTION:
Do not attempt to start the engine if
you have filled the fuel tank with the
incorrect fuel. This could damage the
engine. Have the system checked by a
properly trained technician immediately.
See also:
Thermostat - removal, testing and refitting
OHV engines
Note: A new gasket must be used on refitting.
Removal
1 Drain the cooling system as described in
Chapter 1.
2 Slacken the clips and disconnect the hoses
at the thermostat housing (se ...
Pistons and connecting rods - removal and refitting
1.8 litre (R2A type)
Removal
1 With the engine removed from the vehicle,
remove the sump and the cylinder head.
2 Check the big-end caps for identification
marks and if necessary use a centre-pun ...
Specifications
General
System type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . Multi-point electronic fuel injection
Application . . . . . . . . . . . . . . . . . ...