Cooling fan switch - removal and refitting

On CVH models, the cooling fan switch is located on the right-hand side of the thermostat housing (see illustration). On DOHC models, the switch is located in the end of the thermostat housing.

Removal and refitting of the switch is as described for the temperature gauge sender.

14.1 Disconnecting the wiring plug from the cooling fan switch
14.1 Disconnecting the wiring plug from the cooling fan switch

    See also:

    Combination lap and shoulder belts
    1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened ...

    Steering wheel - centralising
    1 This operation is for correcting small errors in steering wheel centralisation - up to 60º. For larger errors, remove the steering wheel and make a rough correction by repositioning the whe ...

    Global opening and closing
    You can also operate the electric windows with the ignition off via the global opening and global closing function. Note: Global closing will only operate if you have set the memory correctly for ...