Fuel vapour separator (models from 1985) - removal and refitting

Caution: Refer to the precautions in Section 1 before proceeding.

Removal
1 On SOHC models, the vapour separator is located on the left-hand side of the engine compartment. On CVH models, the vapour separator is located on the right-hand side of the engine compartment (see illustrations).

6.1a Fuel vapour separator location 2.0 litre SOHC models from 1985
6.1a Fuel vapour separator location 2.0 litre SOHC models from 1985

A Fuel return hose
B Fuel supply hose
C Carburettor fuel feed hose

6.1b Fuel pressure regulator/vapour separator location - SOHC models from
6.1b Fuel pressure regulator/vapour separator location - SOHC models from 1985

A Fuel supply hose
B Carburettor fuel feed hose C Fuel return hose

6.1c Fuel vapour separator location - CVH models
6.1c Fuel vapour separator location - CVH models

A Fuel supply hose
B Carburettor fuel feed hose C Fuel return hose

2 Disconnect the battery negative lead.

3 Identify the fuel hose locations as an aid to refitting, then disconnect and plug the hoses.

4 Remove the two securing screws and withdraw the vapour separator.

Refitting
5 Refitting is a reversal of removal, ensuring that the fuel hoses are correctly connected. If the hoses were originally secured with crimped type clips, discard them and use new worm drive clips.

    See also:

    Door exterior handle - removal and refitting
    Removal 1 Remove the door inner trim panel. 2 Where necessary for improved access, peel back the waterproof plastic sheet from the door. 3 If working on a front door, remove the window channel ex ...

    Radio/cassette player power amplifier - removal and refitting
    Removal 1 Some “high specification” models are fitted with an audio power amplifier, which is mounted as a separate unit beneath the radio/ cassette unit. To remove the unit proceed as follows. ...

    Carburettor (Weber 2V type) - fast idle speed adjustment
    1 This procedure does not apply to models fitted with a carburettor stepper motor, for which no adjustment is possible. 2 Check the idle speed and mixture. The idle speed must be correct before at ...