Throttle pedal - removal and refitting

Removal
1 Disconnect the battery negative lead.

2 Remove the lower facia panel from the driver’s side.

3 Prise off the securing clip and disconnect the end of the throttle cable from the top of the pedal (see illustration).

11.3 Throttle pedal assembly - cable connection arrowed
11.3 Throttle pedal assembly - cable connection arrowed

4 Remove the two securing nuts, one accessible from the driver’s footwell, the other from the engine compartment, and withdraw the pedal and bracket assembly (see illustration).

11.4 Throttle pedal securing nut (arrowed) in engine compartment
11.4 Throttle pedal securing nut (arrowed) in engine compartment

Refitting
5 Refitting is a reversal of removal, but on completion check the throttle cable adjustment.

    See also:

    Starting a diesel engine
    Cold or hot engine All vehicles Note: When the temperature is below -15ºC (5ºF), you may need to crank the engine for up to 25 seconds. If you consistently operate the vehicle in such ...

    Coded keys
    Note: Do not shield your keys with metal objects. This may prevent the receiver from recognising your key as a valid one. Note: Have all of your remaining keys erased and recoded if you lose a key ...

    Cigar lighter
    CAUTIONS: If you use the socket when the engine is not running, the battery may discharge. Do not hold the cigar lighter element pressed in. Note: Switch the ignition on to use the cigar lighte ...