Carburettor (Weber 2V type) - removal and refitting

1 Proceed as described for the Ford VV carburettor but note the following.

2 On models with an electrically-heated automatic choke, ignore all references to the cooling system and coolant hoses.

3 Not all Weber carburettors are fitted with an anti-dieselling valve.

4 Disconnect all relevant wiring plugs and vacuum pipes, if necessary noting their locations for use when refitting.

5 Disconnect the link arm from the throttle linkage instead of disconnecting the throttle cable.

6 The carburettor is secured to the inlet manifold by four nuts and washers.

    See also:

    Rear seat catch - removal and refitting
    Saloon models 1 Working in the luggage compartment, release the seat catch by pulling the release knob, or if the cable is broken, use a screwdriver to release the catch itself. 2 Fold the backre ...

    Camshaft drivebelt renewal (Every 36 000 miles (60 000 km) or 3 years)
    Camshaft drivebelt renewal is recommended as a precautionary measure for SOHC engines but is compulsory for CVH engines. Refer to Chapter 2 for the appropriate renewal procedure. ...

    Parking brake
    All vehicles WARNING: Vehicles with an automatic transmission should always be left with the selector lever in position P. • Press the foot brake pedal firmly. • Pull the parking brake lever up ...