Carburettor (Weber 2V TLD) - idle speed and mixture adjustment

Refer to Chapter 1, Sections 15 and 16.

    See also:

    Changing a bulb
    WARNINGS: Switch the lights and the ignition off. Let the bulb cool down before removing it. CAUTIONS: Do not touch the glass of the bulb. Only fit bulbs of the correct specification. See Bulb ...

    Timing belt and sprockets - removal and refitting
    Note: Refer to the warning in Section 8 before proceeding. On models from mid-1985 (without a timing belt tensioner spring) the belt tension should be checked using Ford special tool No 21-113 aft ...

    Sunroof - removal, refitting and adjustment
    Glass panel - removal and refitting 1 Open the sunblind and remove the three screws and clips shown (see illustration) then slide the lower frame rearwards into the roof. 39.1 Sunroof lower fr ...