Carburettor (Weber 2V TLD) - fast idle speed adjustment

1 Proceed as described for the Weber 2V carburettor, noting the following.

2 The fast idle adjustment screw should be positioned on the third (middle) step of the fast idle cam (see illustration).

24.2 Fast idle speed adjustment - Weber  2V TLD
24.2 Fast idle speed adjustment - Weber 2V TLD carburettor

A Fast idle cam
B Adjustment screw on middle step of cam

3 Refer to the Specifications at the beginning of this Chapter for the correct fast idle speed.

    See also:

    Major operations possible with the engine in the car
    The following work can be carried out without having to remove the engine: a) Cylinder head - removal and refitting. b) Valve clearances - adjustment (see Chapter 1). c) Sump - removal and refitt ...

    Ignition system component check (Every 6000 miles or 6 months)
    1 Where applicable, remove the distributor cap and thoroughly clean it inside and out with a dry lint-free cloth. Examine the four HT lead segments inside the cap. If the segments appear badly bur ...

    General information
    WARNING: Do not operate the information display controls when the vehicle is moving. Note: The information display will remain on for several minutes after you switch off the ignition. Various ...