Pulse-air delivery tubing (1.6 litre CVH) - removal and refitting
1 Remove the air cleaner assembly.
2 Loosen the hose clips, and disconnect the air hoses from the check valves next to the exhaust manifold (see illustration).
22.2 Pulse-air delivery check valves (arrowed)
3 Remove the two bolts securing the check valve bracket to the exhaust manifold.
4 Unscrew the unions securing the air tubes to the manifold, then carefully withdraw the tubing assembly, taking care not to distort the tubes (see illustration).
22.4 Unscrewing a pulse-air delivery tube union
5 Refitting is a reversal of removal.
See also:
Pistons and connecting rods - examination and renovation
1 Examine the pistons for ovality, scoring,
and scratches. Check the connecting rods for
wear and damage. The connecting rods carry
a letter indicating their weight class; all the
rods fitted must ...
Engine mountings - renewal
Proceed as described in Chapter 2, Part C,
but note that on certain models it may be
necessary to unbolt the engine mounting
brackets from the cylinder block to allow
sufficient clearance to remov ...
Engine oil and filter - renewal
Refer to Section 2, Chapter 2, Part A. ...