Electronic vacuum regulator (1.8 litre (R6A type) CVH) - removal and refitting
1 The EVR unit is located on the right-hand side of the engine compartment, near the front of the car.
2 Disconnect the battery negative lead.
3 Disconnect the EVR wiring plug, and detach the two vacuum hoses, noting their correct location for refitting.
4 Undo the retaining screws, and remove the EVR unit from the car (see illustration).
24.4 Electronic vacuum regulator retaining screws (arrowed) - 1.8 litre (R6A)
CVH
5 Refitting is a reversal of removal.
See also:
Bonnet release cable - removal and refitting
Removal
1 Working inside the vehicle, extract the three
screws and remove the steering column
shroud. Open the bonnet. If the cable is broken,
the release latch must be operated using a
suitably ...
Power steering fluid check
WARNING:
Do not allow the fluid to touch your
skin or eyes. If this happens, rinse
the affected areas immediately with
plenty of water and contact your doctor.
CAUTION:
Make sure that the level ...
Owning
With 30 per cent more luggage space, plus 31 stowage compartments and up to
32 seating configurations, the Galaxy's numbers seem to add up. The big tailgate
extends to the edges, making the boot o ...