Parking brake

Applying the parking brake
Applying the parking brake

WARNING:
Make sure that the parking brake is applied before you release the lever.

Note: Do not press the release button when you apply the parking brake.

1. Press the brake pedal firmly.

2. Pull the parking brake lever upwards to its fullest extent.

Parking on a hill

If you have to park facing uphill, select first gear and turn the front wheels away from the kerb. If you have to park facing downhill, select reverse gear and turn the front wheels towards the kerb.

Releasing the parking brake

1. Press the brake pedal firmly.

2. Pull the parking brake lever upwards slightly, press the release button and push the lever downwards.

    See also:

    Buying a Ford Sierra
    Unsurprisingly, little. Be wary of very-high mileage cars for obvious reasons, though, with service records, you should be safe. Turbo cars can be a little fragile and temperamental, like most of ...

    Cylinder head - removal and refitting (engine removed)
    Note: Up to early 1984, splined type cylinder head bolts were used, and from early 1984, size T55 Torx bolts were used. Torx type bolts must always be renewed after slackening. The two types of bo ...

    Front fog lamps
    Front fog lamps WARNING: Only use the front fog lamps when visibility is considerably restricted by fog, snow or rain. Note: You cannot switch the front fog lamps on if you have switched autol ...