Exhaust pressure transducer (1.8 litre (R6A type) CVH) - removal and refitting

1 The EPT unit is located on the right-hand side of the engine, behind the CFI unit (see illustration).

32.1 Exhaust pressure transducer attachments - 1.8 litre (R6A) CVH
32.1 Exhaust pressure transducer attachments - 1.8 litre (R6A) CVH

A Exhaust pressure transducer B Vacuum hose

2 Disconnect the battery negative lead.

3 Remove the air cleaner assembly.

4 Disconnect the EPT wiring plug, and slip the unit out of its mounting bracket.

5 Detach the vacuum hose, and remove the unit from the car.

6 Refitting is a reversal of removal.

    See also:

    Deceleratio
     sensitive valve (all models with conventional braking system) - removal and refitting

    Caution: Refer to the precautions in Section 1. Removal 1 The deceleration sensitive valve is located on the left-hand side of the engine compartment (see illustrations). 23.1a Early type dece ...

    Switching off the engine
    Vehicles with a turbocharger CAUTION: Do not switch the engine off when it is running at high speed. If you do, the turbocharger will continue running after the engine oil pressure has dropped t ...

    Fastening the seat belts
    Fastening the seat belts WARNING: Insert the tongue into the buckle until a distinct click is heard, otherwise the seat belt will not be locked correctly. Pull the belt out steadily. It may lo ...