Carbon canister-purge solenoid (models with catalytic converter) - removal and refitting

2.0 litre DOHC models 1 The purge solenoid is located next to the carbon canister, on the right-hand side of the engine compartment.

2 Disconnect the battery negative lead.

3 Disconnect the solenoid wiring plug halves by releasing the locktabs and pulling on the plug halves, not the wiring.

4 Note the locations of the two solenoid pipes, and the orientation of the solenoid, to assist with refitting.

5 Disconnect the two pipes from the solenoid, and withdraw the solenoid from its location.

6 Refitting is a reversal of removal. Ensure that the solenoid pipes are correctly reconnected, and that the solenoid is correctly orientated, as noted before removal.

1.6 and 1.8 litre (R6A type) CVH models
7 On 1.6 litre engines, the purge solenoid is located to the rear of the carbon canister, on the right-hand side of the engine compartment. On 1.8 litre engines, the location varies according to model and equipment, but can be traced by following the solenoid pipes back from the carbon canister (see illustration).

34.7 Carbon canister-purge solenoid location (arrowed) - 1.6/1.8 litre (R6A)
34.7 Carbon canister-purge solenoid location (arrowed) - 1.6/1.8 litre (R6A) CVH

8 Proceed as detailed in paragraphs 2 to 6 inclusive.

    See also:

    Audio control
    Select radio, CD or cassette mode on the audio unit. The following functions can be operated with the remote control: Volume Volume up: Pull the VOL+ switch towards the steering wheel. Volume ...

    Timing belt and sprockets - removal and refitting
    Note: The belt tension should be checked using Ford special tool No 21-113 after refitting. A suitable puller may be required to remove the sprockets. If the camshaft sprocket is removed, a new re ...

    Front foglamps - removal and refitting
    1 Disconnect the battery negative lead. Models up to 1987 2 Remove the relevant front direction indicator lamp unit. 3 Release the retaining catch on the inside edge of the lamp, then withdraw th ...