Rear suspension leaf spring bush (P100 models) - renewal

Note: All self-locking nuts and spring washers must be renewed on reassembly.

1 Proceed as described in Section 19, paragraphs 1 to 3 inclusive.

2 Unbolt the relevant end of the leaf spring, and lower it to gain access to the bush. Note that if the shackle end of the spring is unbolted, the shackle-to-underbody bolt should be loosened in order to aid refitting.

3 The bush can be removed using a long bolt with nut, washers and a suitable metal tube.

4 Lubricate the new bush with soapy water and fit using the bolt, nut, washers and tube.

5 Proceed as described in Section 19, paragraphs 6 to 9 inclusive.

    See also:

    CD changer
    This is located under the front passenger seat. ...

    General Repair Procedures
    Whenever servicing, repair or overhaul work is carried out on the car or its components, it is necessary to observe the following procedures and instructions. This will assist in carrying out the ...

    Diagram 2a. Interior lighting. Models up to 1987
    Diagram 2a. Interior lighting. Models up to 1987 ...