Door exterior handle - removal and refitting

Removal
1 Remove the door inner trim panel.

2 Where necessary for improved access, peel back the waterproof plastic sheet from the door.

3 If working on a front door, remove the window channel extension screw from the bottom rear corner of the door, and withdraw the channel through the lower door aperture (see illustration).

19.3 Front door window channel extension
19.3 Front door window channel extension

A Remove the retaining screw (arrowed) B Withdraw the channel through the lower door aperture

4 Disconnect the handle operating rod at the lock.

5 Remove the two handle securing screws and withdraw the handle and operating rod from the door.

Refitting
6 Refitting is a reversal of removal, but if working on a front door, ensure that the window channel extension is correctly located.

    See also:

    Specifications
    General Engine type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four-cylinder, in-line, double overhead camshaft Engine code: Carburettor engine ...

    Driving
    All-round refinement is definitely a Mondeo strong point. No rival cruises as comfortably at high speeds or deals with coarse surfaces so well. It even delivers a cosseting ride around town. We te ...

    Using a USB device
    Various icons are used to identify types of audio file, folders etc. USB device is the active source Folder Playlist Album Artist Filename Track title Information not availabl ...