Door lock barrel - removal and refitting

Removal
1 Remove the door inner trim panel.

2 Where necessary for access, peel back the waterproof plastic sheet from the door.

3 Remove the window channel extension screw from the bottom rear corner of the door, and withdraw the channel through the lower door aperture.

4 Working inside the door aperture, pull out the lock barrel retaining clip using pliers, then unhook the lock operating rod from the barrel, and withdraw the barrel from outside the door (see illustration).

20.4 Door lock barrel location. Retaining clip arrowed
20.4 Door lock barrel location. Retaining clip arrowed

Refitting
5 Refitting is a reversal of removal.

    See also:

    Diagram 2. Exterior lighting - head/sidelamps. Models from 1990 onwards
    Diagram 2. Exterior lighting - head/sidelamps. Models from 1990 onwards ...

    Major operations requiring engine removal
    The following work can only be carried out after removal of the engine from the car: a) Crankshaft main bearings - renewal . b) Crankshaft - removal and refitting. c) Flywheel - removal and refitt ...

    Specifications
    Torque wrench setting Nm lbf ft All seat belt anchor bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 to 41 21 to 30 ...