Opening rear quarter window - removal and refitting

Removal
1 Remove the rear pillar interior trim panel.

2 Remove the two screws securing the window catch to the body (see illustration).

26.2 Opening the rear quarter window catch
26.2 Opening the rear quarter window catch

A Cap
B Retainer
C Grommet
D Spacer
E Catch
F Screw (one of two)

3 Prise the two screw covers from the hinges.

Support the glass, and remove the two hinge screws, then lift out the glass (see illustration).

26.3 Opening the rear quarter window hinge
26.3 Opening the rear quarter window hinge

A Cap
B Screw
C Hinge
D Spacer
E Grommet
F Retainer
G Cap
H Screw

4 If a new window is to be fitted, transfer the catch to it.

Refitting
5 Refitting is a reversal of removal.

    See also:

    Fastening the seat belts
    WARNING: Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click. Pull the belt out steadily. It may lock if ...

    Carbon canister (models with catalytic converter) - removal and refitting
    2.0 litre DOHC models 1 Where fitted, the carbon canister is located on the right-hand side of the engine compartment, underneath the coolant expansion tank. 2 Disconnect the battery negative lea ...

    Major operations possible with the engine in the vehicle
    The following operations can be carried out without removing the engine from the vehicle: a) Removal and servicing of the cylinder head b) Removal of the camshaft after removal of the cylinder he ...