Exterior rear pillar trim panel (Saloon models) - renewal

1 Remove the interior rear pillar trim panel.

2 Unscrew the three now exposed securing nuts and withdraw the exterior trim panel (see illustration).

34.2 Exterior rear pillar trim panel securing nut locations (arrowed) -
34.2 Exterior rear pillar trim panel securing nut locations (arrowed) - Saloon models A Heated rear window wiring plug

3 Refitting is a reversal of removal, but do not overtighten the securing nuts, as this may result in damage to the rubber seals.

    See also:

    Pulse air filter element renewal (1.6 litre CVH) (Every 24 000 miles (40 000 km) or 2 years)
    1 The pulse-air filter is located at the front left-hand side of the engine compartment. 2 To renew the element, simply unclip the filter cover, then lift out the metal gauze, and withdraw the fil ...

    Rear suspension front mounting (Saloon, Hatchback and Estate models) - renewal
    1 Chock the front wheels, jack up the rear of the vehicle and support on axle stands placed under the side members. 2 Unscrew and remove the three bolts securing the relevant front guide plate to ...

    Throttle pedal - removal and refitting
    Refer to Chapter 4 Part A, Section 11. ...