Wheel arch liners - renewal

1 Where fitted, the wheel arch liners may be retained by self-tapping screws, plastic clips, or a combination of both.

2 To remove a liner, simply unscrew the retaining screws, or where plastic clips are fitted, release them by turning with a screwdriver (see illustration).

36.2 Releasing a wheel arch liner plastic clip
36.2 Releasing a wheel arch liner plastic clip

3 Refitting is a reversal of removal.

    See also:

    Front suspension lower arm inner pivot bush - renewal
    1 To improve access, raise the front of the vehicle on ramps. Apply the handbrake. 2 Unscrew and remove the nut, washer and pivot bolt securing the relevant lower arm to the crossmember. 3 Remove ...

    Speedometer cable - removal and refitting
    Removal 1 Disconnect the battery and remove the instrument panel as described in Section 9. 2 Disconnect the cable from the transmission and release it from its clips and grommet. 3 Withdraw the ...

    Diagram 4. 2.0 Efi fuel injection and ignition. Models from 1987 to May 1989
    Diagram 4. 2.0 Efi fuel injection and ignition. Models from 1987 to May 1989 ...