Overhead console - removal and refitting

1 Disconnect the battery negative lead.

2 Open the sunroof.

3 On models with a manually-operated sunroof, remove the sunroof handle securing screw, then withdraw the handle and trim plate.

4 On models with an electric sunroof, remove the operating switch.

5 Remove the courtesy lamp, if necessary, then remove the two screws from the front of the console (see illustration).

45.5 Overhead console securing screws (A)
45.5 Overhead console securing screws (A)

6 Remove the two screws securing the rear of the console to the sunroof flange, and withdraw the console.

7 Refitting is a reversal of removal.

    See also:

    Carburettor (Pierburg 2V type) - fast idle speed adjustment
    1 Check the idle speed and mixture adjustment. The idle speed must be correct before attempting to check or adjust the fast idle speed. 2 With the engine at normal operating temperature, and a ta ...

    Pulse-air filter element (1.6 litre CVH) - renewal
    Refer to Chapter 1, Section 37. ...

    Rear suspension leaf spring shackle (P100 models) - removal and refitting
    Note: All self-locking nuts and spring washers must be renewed on reassembly. Removal 1 Chock the front wheels, jack up the rear of the vehicle and support on axle stands placed under the side me ...