Direction indicator/hazard warning flasher relay - renewal

1 Disconnect the battery negative lead.

2 The relay is located on a bracket above the steering column. Access is gained either by removing the driver’s side lower facia panel or the instrument panel.

3 Unclip the relay from the bracket, and disconnect the wiring plug (see illustration).

6.3 Direction indicator/hazard warning flasher relay location (arrowed)
6.3 Direction indicator/hazard warning flasher relay location (arrowed)

4 Refitting is a reversal of removal. Check for correct operation before refitting the facia panel or instrument panel.

    See also:

    Navigation introduction
    Road Safety WARNINGS: The system provides you with information designed to help you reach your destination quickly and safely. For reasons of safety, the driver should only program the system ...

    Starter motor - testing in the car
    Note: Refer to the precautions given in “Safety first!” and in Section 1 of this Chapter before proceeding. 1 If the starter motor fails to operate when the ignition key is turned to the appropria ...

    Aiming the headlamps
    The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer. Verti ...