Courtesy lamp switch - renewal

1 Disconnect the battery negative lead.

2 Open the door and remove the switch securing screw.

3 Withdraw the switch from the door pillar and pull the wiring out sufficiently to prevent it from springing back into the pillar (see illustration).

12.3 Withdrawing a courtesy lamp switch
12.3 Withdrawing a courtesy lamp switch

4 Disconnect the wiring and remove the switch.

5 Refitting is a reversal of removal.

    See also:

    Manual seats
    Moving the seats backwards and forwards WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch. Adjusting the lumbar suppo ...

    General information
    The 1.1 litre, 1.3 litre, 1.4 litre and 1.6 litre CVH (Compound Valve angle, Hemispherical combustion chambers) engines are of four cylinder in-line overhead camshaft type, mounted transversely, t ...

    Wheel arch liners - renewal
    1 Where fitted, the wheel arch liners may be retained by self-tapping screws, plastic clips, or a combination of both. 2 To remove a liner, simply unscrew the retaining screws, or where plastic cl ...