Handbrake УonФ warning lamp switch - renewal

1 Disconnect the battery negative lead.

2 Working inside the vehicle, remove the handbrake lever rubber gaiter and/or the centre console, as necessary.

3 Disconnect the wiring connector from the switch, then remove the two securing screws and withdraw the switch from the handbrake lever (see illustration).

14.3 Handbrake УonФ warning lamp switch location (arrowed)
14.3 Handbrake УonФ warning lamp switch location (arrowed)

4 Refitting is a reversal of removal.

    See also:

    Using winter tyres
    CAUTION: Make sure that you use the correct wheel nuts for the type of wheel the winter tyres are fitted to. If winter tyres are used, make sure that the tyre pressures are correct. See Technica ...

    What You should know about compact sedans cars
    The majority of the compact-sedan class has been heavily revised or totally redesigned in the past two years, and Dodge has just rolled out its Alfa Romeo-based Dart, the latest entry in a hotly conte ...

    Crankshaft and bearings - examination and renovation
    1 Examine the bearing surfaces of the crankshaft for scratches or scoring and, using a micrometer, check each journal and crankpin for ovality. Where this is found to be in excess of 0.0254 mm (0. ...