See also:

Crankshaft front oil seal - renewal
Note: A suitable puller will be required to remove the crankshaft pulley. A new crankshaft pulley bolt, and a new lower timing chain cover gasket, must be used on refitting. 1 The crankshaft front ...

Washer fluid check
The front and rear washer systems are supplied from the same reservoir. ...

Fuel pressure regulator - removal and refitting
Note: Refer to the precautions at the end of Section 1 before proceeding. Removal 1 The fuel pressure regulator is only used on KE-Jetronic systems and is located behind the fuel distributor (see ...