Lights-on warning module - renewal

1 Remove the instrument panel.

2 Unclip the direction indicator relay from the steering column support bracket (see illustration).

24.2 Lights-on warning module location
24.2 Lights-on warning module location

A Lights-on warning module B Direction indicator relay C Lights-on warning module wiring plug

3 Unclip the lights-on warning module from the steering column support bracket, disconnect the wiring plug and remove the module.

4 Refitting is a reversal of removal.

    See also:

    Rear window wiper and washers
    Intermittent wipe Reverse gear wipe The rear window wiper will operate automatically when you select reverse gear if the wiper lever is in position B, C or D. Washer WARNING: Do not operat ...

    Engine/automatic transmission assembly - removal and separation
    Note: Refer to the warning at the beginning of Section 5 before proceeding. A suitable hoist and lifting tackle will be required for this operation. Any suspected faults in the automatic transmiss ...

    Engine - refitting (manual gearbox in vehicle)
    1 Reverse the procedure described in paragraphs 1 to 40, Section 5, noting the following points. 2 Before attempting to refit the engine, check that the clutch friction disc is centralised. 3 Che ...