Windscreen wiper motor and linkage - removal and refitting

Removal
1 Disconnect the battery negative lead.

2 Remove the wiper arms.

3 Remove the windscreen cowl panel.

4 Disconnect the wiring plug from the motor.

5 Remove the seven securing screws, and withdraw the mounting bracket together with the linkage and motor (see illustration).

34.5 Windscreen wiper motor bracket securing screws (arrowed)
34.5 Windscreen wiper motor bracket securing screws (arrowed)

6 Unscrew the nut securing the link arm to the motor shaft, then remove the three securing bolts, and withdraw the motor from the mounting bracket.

Refitting
7 Refitting is a reversal of removal.

    See also:

    About this handbook
    Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this handbook. The more that you know about it, the greater the safety and pleasure you wi ...

    Using a USB device
    Various icons are used to identify types of audio file, folders etc. USB device is the active source Folder Playlist Album Artist Filename Track title Information not availabl ...

    General information
    WARNINGS: Use load securing straps to an approved standard, e.g. DIN. Make sure that you secure all loose items properly. Place luggage and other loads as low and as far forward as possible wit ...