Windscreen/headlamp washer pump - removal and refitting

Removal
1 Where headlamp washers are fitted, a separate pump is used. The pump(s) is/are a push-fit in the base of the washer fluid reservoir (see illustration).

35.1 Windscreen washer pump - models from 1987
35.1 Windscreen washer pump - models from 1987

2 Disconnect the battery negative lead.

3 To remove a pump, syphon out the contents of the reservoir, then pull the pump from its grommet.

4 Disconnect the wiring plug and the washer hose.

Refitting
5 Refitting is a reversal of removal, using a new grommet if necessary. Use a little liquid detergent as a lubricant.

6 On completion, refill the reservoir and check for correct operation.

    See also:

    Exhaust manifold nut check - RS Turbo models (Every 6000 miles or 6 months)
    Check the tightness of the exhaust manifold securing nuts using a torque wrench. ...

    Gauges
    Type 1 and 2 Tachometer A Engine coolant temperature gauge B Fuel gauge C Speedometer D Type 3 Tachometer A Speedometer B Engine coolant temperature gauge C Fuel gauge D Message centre. ...

    Warning lights and chimes
    Base instrument cluster shown in standard measure. Metric similar. Optional instrument cluster shown in standard measure. Metric similar. Warning lights and gauges can alert you to a vehicle co ...