Front direction indicator side repeater lamp - removal and refitting

1 Disconnect the battery negative lead.

Models up to 1987
2 To improve access, turn the steering onto full lock.

3 Remove the relevant wheel arch liner.

4 Working under the wheel arch, depress the retaining tabs and withdraw the lamp through the outside of the wing (see illustration).

45.4 Withdrawing a front direction indicator side repeater lamp - models up
45.4 Withdrawing a front direction indicator side repeater lamp - models up to 1987

Disconnect the bulbholder by twisting it anticlockwise.

5 Refitting is a reversal of removal.

Models from 1987
6 To improve access, turn the steering onto full lock.

7 Working in the engine compartment, disconnect the wiring plug.

8 Remove the relevant wheel arch liner.

9 Working under the wheel arch, twist the lamp clockwise and withdraw it through the outside of the wing. Feed the wiring through the holes in the wing panels.

10 Refitting is a reversal of removal.

    See also:

    Engine oil check
    CAUTION: Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. Note: The oil consumption of new engines reaches its normal level after app ...

    Clock - removal and refitting
    Facia mounted clock Removal 1 Remove the instrument panel (Section 9). 2 Undo the screws around the edge of the instrument panel at the rear and separate the two panel halves. 3 Undo the nuts an ...

    Rear window defroster
    The rear defroster control is located on the climate control panel and works to clear the rear window of fog and thin ice. The engine must be running to operate the rear window defroster. Press ...