Radio/cassette player power amplifier - removal and refitting

Removal
1 Some high specification models are fitted with an audio power amplifier, which is mounted as a separate unit beneath the radio/ cassette unit. To remove the unit proceed as follows.

2 Disconnect the battery negative lead.

3 Remove the two screws under the top edge of the power amplifier unit.

4 Slide the unit forwards from the facia panel, until the wiring plugs can be disconnected.

Disconnect the wiring plugs and remove the unit.

Refitting
5 Refitting is a reversal of removal.

    See also:

    Luggage covers
    WARNING: Do not place objects on the luggage cover. Note: When moving the rear seats into the comfort position, fold back the cover from the front edge. Detach the two lifting straps on the t ...

    Engine coolant check
    Checking the coolant level WARNING: Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. CAUTION ...

    Timing chain, sprockets and tensioner - examination and renovation
    1 Examine alI the teeth on the camshaft and crankshaft sprockets. If the teeth are hooked in appearance, renew the sprockets. 2 Examine the chain tensioner plastic sprocket for wear. If excessiv ...